Stall Area Equipment
Removable slant tubing dividers (per two stalls) with solid head partitionQuick release slam latches on all dividers
One-piece rear door matches sides
Interior and exterior tie rings

Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & reflectors)
Dome lights (one in tack room and one in stall area)

Front Tack Room Equipment
Front slant tack room (Tack room size - 0' to 4'-6")
Full height partition wall between stalls and front tack room
Full dressing room door with recessed locking handle 31-1/4" x 71" (6'-6" tall model) located on curb side
Clothes rod in tack room
Four saddle racks on a tree and bridle hooks in tack room

Dakota: Standard Features

Available Sizes
2-horse bumper pull, 14' floor length w/2-3500# axles, 15" tires & 6-hole wheels
3-horse bumper pull, 16' floor length w/2-3500# axles, 15" tires & 6-hole wheels
3-horse bumper pull, 16' floor length w/2-5200# axles, 15" tires & 6-hole wheels

Dimensions
6'-6" body height
6' body width
30" tongue length

Undercarriage
Rubber torsion axles with four wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps
Spare tire rack in tack room

Coupler & Jacks
2-5/16" coupler and safety chains with hooks
Top-wind jack with caster wheel
Emergency breakaway system: switch, cable and battery box complete with battery and charger

Design Features & Hardware
Low profile 6" radius corner galvanneal roof
All steel frame with formed galvanneal panels
Rubber mounted optical window in front
52" sides with air spaces above with plexiglass strap on both sides (plexiglass and rail not standard)
Treated floor
Steel hold backs on front tack door
Drop leg rear gate stop
Greasable exterior hinges
Aluminum tread plate gravel guard
Chrome trim with colored vinyl insert
Pin striping
Tag bracket

Back 40 Supply reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.