Stall Area Equipment
14" x 34" radius corner sliding windows on butt wall
Double rear doors with 14" x 16" radius corner sliding window and safety bars in each door with hold backs and cam latch
Slant tubing dividers with solid head partitions
Spring loaded, slam latches on slant dividers
Stall area lined with rubber kick mats on all walls
Aluminum framed drop-down feed door with radius corner sliding window at each horses' head
Side access door in front stall on street side with an aluminum framed drop-down feed door and radius corner sliding window
Vet type rubber floor mats (5/8" thick)
Aluminum two-way flip-up roof vent over each horse
Interior and exterior tie rings
Butt strap at rear stall and breast strap at front stall access door

Front Tack Room Equipment
Radius top camper type entry door with locking recessed handle
Front slant tack room with carpet (tack room size - 0 to 4'6")
Bridle hooks in front tack room
Aluminum brush tray and blanket bar in tack room

Rear Tack Compartment Equipment
Dimensions: 54" long x 31"wide (7' wide model)
Choice of permanent rear tack with four carpeted saddle racks on a tree or rear tack with fold-away wall and removable post with four carpeted saddle racks on a tree
Aluminum brush tray on permanent rear tack door only
Blanket bar on rear tack door
Bridle hooks on rear tack wall

Lariat: Standard Features

Available Sizes
2-horse bumper pull, 14' floor length w/2-5200# axles, 15" tires & 6-hole wheels
3-horse bumper pull, 17' floor length w/2-5200# axles, 15" tires & 6-hole wheels

Dimensions
7' or 6'-6" body height
7' or 6' body width, maximum interior width without fender wells
24" tongue length

Undercarriage
Rubber torsion axles with all wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps
Spare tire rack only

Coupler & Jacks
2-5/16" coupler and safety chains with hooks
Top-wind jack with caster wheel
Emergency breakaway system: switch, cable and battery box complete with battery and charger

Design Features & Hardware
Low profile 6" radius corner aluminum roof
All steel tubular frame and side structure with .050 pre-painted white smooth aluminum side panel
Double lined smooth galvanneal walls in horse area with 1-1/2" styrofoam insulation
Wedge nose
Treated floor
Roll-up camper vent in tack room (can be replaced with optional air conditioner)
Rubber bumper on rear
Bolt-on aluminum mill finish fenders
Aluminum tread plate gravel guard
AE graphic package
Tag bracket

Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & reflectors)
Dome lights (one in each stall, one in rear tack compartment and one in tack room)
Two rear exterior loading lights above rear doors; exterior loading light at tack room door
Four tail lights
All dome lights and loading lights are recessed and on a separate circuit

Back 40 Supply reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.