Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & conspicuity tape)
Double recessed tail lights
Two recessed rear exterior loading lights above rear door
Recessed exterior light at tack room door
Recessed dome lights (one in each stall, one in tack room and one in rear tack compartment)
All dome lights and loading lights are recessed and on a separate circuit

Stall Area Equipment
Spring loaded removable slant tubing dividers (per two stall) with solid head partition
Quick release slam latches on all dividers
Stall area walls double lined with 16 gauge galvanneal steel and insulated with 1-1/2"styrofoam insulation
Rubber interior kick mat wall lining (1/4" thick) 31" high on rear doors, slant wall, head wall, & butt wall
Vet type rubber floor mats (5/8" thick)
Rear stall door, full height x (34" on 6' width and 41-1/2" on 7' width) with all aluminum cast cam latch and 14" x 16" radius corner sliding window
Aluminum framed drop-down feed doors with radius corner sliding windows
Extra heavy duty side access door in front stall on street side with an aluminum framed drop-down feed door and radius corner sliding window
Radius corner sliding windows (34" x 14") on butt wall and (14" x 16") on rear doors
Aluminum two-way flip-up roof vents in horse area
Feed bag rings (3 per stall)
Interior and exterior tie rings
Removable butt strap
Removable breast strap

Front Tack Room Equipment
Dimensions: 2' to 6'6" x (6' or 7') wide plus 7' gooseneck
Full height partition wall between stalls and front tack room
Camper type entry door, 30" x 66" (6'-6" tall model) or 30" x 72" (7' tall model)
Front slant tack room with carpet
Aluminum tray and blanket bar in tack room
Roll-up camper vent in tack room (can be replaced with optional air conditioner)
Camper door with screen, radius corner sliding window and step underneath
Insulated and carpeted front tack room walls

Rear Tack Compartment Equipment
Dimensions: 54" long x 31"wide (7' wide model)
Choice of permanent rear tack with four carpeted saddle racks on a tree or rear tack with fold-away wall and removable post with four carpeted saddle racks on a tree
Aluminum brush tray on permanent rear tack door only
Blanket bar on rear tack door
Bridle hooks on rear tack wall

LEGACY: Standard Features

Available Sizes
2-horse gooseneck, 14' floor length w/2-5200# axles, 15" tires & 6-hole wheels
3-horse gooseneck, 17' floor length w/2-5200# axles, 15" tires & 6-hole wheels
4-horse gooseneck, 20' floor length w/2-6000# axles, 16" tires & 8-hole wheels

Dimensions
7' or 6'-6" body height
7', or 6' body width (7'-0" & 6'-0" models maximum interior width without interior fender wells)
7' gooseneck length

Undercarriage
Rubber torsion axles with four wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps
Spare tire, wheel and rack

Coupler & Jacks
Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks
Heavy duty low profile gooseneck structure
Single speed drop-leg jack
Emergency breakaway system: switch, cable and battery box complete with battery and charger

Design Features & Hardware
Low profile 6" radius corner aluminum roof
All steel tubular frame and side structure with .050 pre-painted white smooth aluminum side panel
Tapered nose, (6' models) 6' to 54" with 16" radius corners for efficient aerodynamics (7' models) 7' to 60" with 16" radius corners for efficient aerodynamics
Radius corner sliding window in each side of nose 19" x 53"
Treated floor
Bolt-on aluminum mill finish fenders
Extruded aluminum lower edge protector
Aluminum tread plate gravel guard
Steel hold backs on all full height doors and rubber hold backs on feed doors
Rubber dock bumper below rear door
AE graphic package
Tag bracket

Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & conspicuity tape)
Double recessed tail lights
Two recessed rear exterior loading lights above rear door
Recessed exterior light at tack room door
Recessed dome lights (one in each stall, one in tack room and one in rear tack compartment)
All dome lights and loading lights are recessed and on a separate circuit

Back 40 Supply reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.