Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance & reflectors)
Dome lights (one at center in rear to adjust stall lighting and one in front tack room)
Two rear exterior loading lights above rear doors
Four tail lights
All dome lights and loading lights are recessed and on a separate circuit

Stall Area Equipment
19" x 53" large radius corner sliding window on each side of stall area with safety bars
Swingable head stall divider with full ventilation bars
Removable solid half divider with padding and a solid shoulder partition
Tack compartment with feed manger above
Padding on divider and breast plate
Rubber kick mats on rear ramp, side walls and breast plate
Full ramp with spring lift and hinged rear curtains above
Double rear curtains with 14" x 16" radius corner sliding window and safety bars in each curtain with hold backs and cam latch
Vet type rubber floor mats (5/8" thick)
No rear post
Aluminum two-way flip-up roof vent over each horse
Interior and exterior tie rings
Butt straps

Front Tack Room Equipment
Full size access door with locking recessed handle 29" x 74-1/4", located on curb side
Saddle compartment accessible through front tack room with individual carpeted saddle racks on each side
3' front tack room with 30" front tack room door
Bridle hooks in front tack room
Brush tray in front tack room

SARATOGA: Standard Features

Available Sizes
2-horse bumper pull, 15' floor length w/2-3500# axles, 15" tires & 5-hole wheels

Dimensions
7' body height
6' body width
7' stall length with three butt strap settings
24" tongue length

Undercarriage
Rubber torsion axles with all wheel independent suspension and greasable hubs for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps

Coupler & Jacks
2-5/16" coupler and safety chains with hooks
Top-wind jack with caster wheel
Emergency breakaway system: switch, cable and battery box complete with battery and charger

Design Features & Hardware
Low profile 6" radius corner aluminum roof
All steel tubular frame and side structure with .050 pre-painted white aluminum side panel
Double lined smooth galvanneal walls in horse area with 1-1/2" styrofoam insulation
Aluminum framed drop-down feed door with radius corner sliding window at each horse's head
14" x 16" windows (one in front tack room door and one opposite front tack room door)
24" walk-thru door in center of horses (from horse area to front tack room)
Wedge nose
Aluminum floor
Rubber bumper on rear
Bolt-on aluminum mill finish fenders
Aluminum tread plate gravel guard
AE graphic package
Tag bracket
Extruded aluminum bottom edge protector

Back 40 Supply reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.